Advance at 04:25, 10 October 2019

2019-10-10T04:25:47Z

Advance: Created page with "{| class="wikitable" !colspan="6"|Catalyst & Resin Mixing Table |- |FOR THIS CONCENTRATION OF CATALYST L-50 OR M-50 |1 QUART RESIN |1 GAL. RESIN |5 GALS. RESIN |55 GAL. DRUM 4..."

2019-10-10T04:24:20Z

Created page with "{| class="wikitable" !colspan="6"|Catalyst & Resin Mixing Table |- |FOR THIS CONCENTRATION OF CATALYST L-50 OR M-50 |1 QUART RESIN |1 GAL. RESIN |5 GALS. RESIN |55 GAL. DRUM 4..."

New page

{| class="wikitable"
!colspan="6"|Catalyst & Resin Mixing Table
|-
|FOR THIS CONCENTRATION OF CATALYST L-50 OR M-50
|1 QUART RESIN
|1 GAL. RESIN
|5 GALS. RESIN
|55 GAL. DRUM 475 LBS.
|-
|0.5% RESIN
|4.7 CC 0.2 OZ.
|18.8 CC 0.72 OZ.
|94.0 CC 3.6 CC
|2.5 LBS. 40 OZ.
|-
|1% GELCOAT
|9.4 CC 0.4 OZ.
|37.6 CC 1.44 OZ.
|188 CC 7.2 OZ.
|4.95 LBS. 79 OZ.
|-
|1.5%
|14.1 CC 0.54 OZ.
|56.4 CC 2.2 OZ.
|282.0 CC 10.8 OZ.
|7.4 LBS 119 OZ.
|-
|2%
|18.8 CC 0.72 OZ.
|75.2 CC 2.9 OZ.
|376.0 CC 14.4 OZ.
|9.9 LBS. 158 OZ.
|}

Note:
These chemical reactions are temperature sensitive. Best results happen between 60°F - 80°F.
We recommend you start at 1% for resins. Do NOT go lower than ½% for resin.
We recommend you start at 1-1.5% for Gelcoats. Do NOT go lower than 1% for gelcoats.

For faster promotions than 2% call Advance Coatings Company

← Older revision		Revision as of 04:25, 10 October 2019
Line 1:		Line 1:
		+	Small amounts of catalyst are required for Polyester Resin hardening. See below for approximate values.
		+
	{\| class="wikitable"		{\| class="wikitable"
	!colspan="6"\|Catalyst & Resin Mixing Table		!colspan="6"\|Catalyst & Resin Mixing Table

Template:MixingTable - Revision history

Advance at 04:25, 10 October 2019

Advance: Created page with "{| class="wikitable" !colspan="6"|Catalyst & Resin Mixing Table |- |FOR THIS CONCENTRATION OF CATALYST L-50 OR M-50 |1 QUART RESIN |1 GAL. RESIN |5 GALS. RESIN |55 GAL. DRUM 4..."