Difference between revisions of "Mold Making"

Latest revision as of 17:36, 1 September 2025

This page is a WIP. Please wait.

When working with Cardboard, it's easier to have it preformed as much as possible, instead of trying to start with a general idea of what you are going to make, glassing, and then grinding / cutting the glass afterwards. Basically, you will have a much easier time working with simpler crafting materials before curing, rather than trying to bend the glass to do what you want to do after it is cured.
A little extra effort towards cleanliness will help make your work area that much neater.

@@ Line 1: / Line 1: @@
-WIP
+This page is a WIP. Please wait.
+* When working with Cardboard, it's easier to have it preformed as much as possible, instead of trying to start with a general idea of what you are going to make, glassing, and then grinding / cutting the glass afterwards. Basically, you will have a much easier time working with simpler crafting materials before curing, rather than trying to bend the glass to do what you want to do after it is cured.
+* A little extra effort towards [[cleanliness]] will help make your work area that much neater.
-==External Links==
+See [[External links]]
-* [https://hvartial.kapsi.fi/index.htm Hannu's Boatyard] - Tips on making small and medium sized wooden boats. These can serve as originals for molds.
-* https://www.alibris.com/search/books/subject/Biography-Autobiography-Entertainment-Performing-Arts?wquery=every+tools+a+hammer - Every Tool's a Hammer by Adam Savage. General advice for Makers.