Difference between revisions of "Methyl Ethyl Ketone Peroxide"
From Advance Coatings Wiki
Jump to navigationJump to search| Line 1: | Line 1: | ||
| − | [[Methyl Ethyl Ketone Peroxide]] (MEKP) is a hardener or catalyst used for [[Polyester Resin]]. It is used in small | + | [[Methyl Ethyl Ketone Peroxide]] (MEKP) is a hardener or catalyst used for [[Polyester Resin]]. It is used in small quantities relative to the resin when mixing. It is highly flammable. |
[[File:MEKP Small Bottle.jpg|200px|thumb|right|Use caution: Flammable.]] | [[File:MEKP Small Bottle.jpg|200px|thumb|right|Use caution: Flammable.]] | ||
==Safety== | ==Safety== | ||
MEKP is highly flammable. It is also corrosive. Do not leave exposed to skin for long periods of time. Use caution. | MEKP is highly flammable. It is also corrosive. Do not leave exposed to skin for long periods of time. Use caution. | ||
| + | |||
| + | ==Mixing Table== | ||
| + | |||
| + | |||
| + | {| class="wikitable" | ||
| + | !colspan="6"|Catalyst & Resin Mixing Table | ||
| + | |- | ||
| + | |FOR THIS CONCENTRATION OF CATALYST L-50 OR M-50 | ||
| + | |1 QUART RESIN | ||
| + | |1 GAL. RESIN | ||
| + | |5 GALS. RESIN | ||
| + | |55 GAL. DRUM 475 LBS. | ||
| + | |- | ||
| + | |0.5% RESIN | ||
| + | |4.7 CC 0.2 OZ. | ||
| + | |18.8 CC 0.72 OZ. | ||
| + | |94.0 CC 3.6 CC | ||
| + | |2.5 LBS. 40 OZ. | ||
| + | |- | ||
| + | |1% GELCOAT | ||
| + | |9.4 CC 0.4 OZ. | ||
| + | |37.6 CC 1.44 OZ. | ||
| + | |188 CC 7.2 OZ. | ||
| + | |4.95 LBS. 79 OZ. | ||
| + | |- | ||
| + | |1.5% | ||
| + | |14.1 CC 0.54 OZ. | ||
| + | |56.4 CC 2.2 OZ. | ||
| + | |282.0 CC 10.8 OZ. | ||
| + | |7.4 LBS 119 OZ. | ||
| + | |- | ||
| + | |2% | ||
| + | |18.8 CC 0.72 OZ. | ||
| + | |75.2 CC 2.9 OZ. | ||
| + | |376.0 CC 14.4 OZ. | ||
| + | |9.9 LBS. 158 OZ. | ||
| + | |} | ||
| + | |||
| + | Note: | ||
| + | These chemical reactions are very temperature sensitive. Best results happen between 60°F - 80°F. | ||
| + | We recommend you start at 1% for resins. Do NOT go lower than ½% for resin. | ||
| + | We recommend you start at 1-1.5% for Gelcoats. Do NOT go lower than 1% for gelcoats. | ||
| + | |||
| + | ** For faster promotions than 2% call Advance Coatings Company ** | ||
Revision as of 04:21, 10 October 2019
Methyl Ethyl Ketone Peroxide (MEKP) is a hardener or catalyst used for Polyester Resin. It is used in small quantities relative to the resin when mixing. It is highly flammable.
Safety
MEKP is highly flammable. It is also corrosive. Do not leave exposed to skin for long periods of time. Use caution.
Mixing Table
| Catalyst & Resin Mixing Table | |||||
|---|---|---|---|---|---|
| FOR THIS CONCENTRATION OF CATALYST L-50 OR M-50 | 1 QUART RESIN | 1 GAL. RESIN | 5 GALS. RESIN | 55 GAL. DRUM 475 LBS. | |
| 0.5% RESIN | 4.7 CC 0.2 OZ. | 18.8 CC 0.72 OZ. | 94.0 CC 3.6 CC | 2.5 LBS. 40 OZ. | |
| 1% GELCOAT | 9.4 CC 0.4 OZ. | 37.6 CC 1.44 OZ. | 188 CC 7.2 OZ. | 4.95 LBS. 79 OZ. | |
| 1.5% | 14.1 CC 0.54 OZ. | 56.4 CC 2.2 OZ. | 282.0 CC 10.8 OZ. | 7.4 LBS 119 OZ. | |
| 2% | 18.8 CC 0.72 OZ. | 75.2 CC 2.9 OZ. | 376.0 CC 14.4 OZ. | 9.9 LBS. 158 OZ. | |
Note: These chemical reactions are very temperature sensitive. Best results happen between 60°F - 80°F. We recommend you start at 1% for resins. Do NOT go lower than ½% for resin. We recommend you start at 1-1.5% for Gelcoats. Do NOT go lower than 1% for gelcoats.
- For faster promotions than 2% call Advance Coatings Company **
