Aliphatic Urethane

Aliphatic Urethane is a general purpose urethane we sell. It is normally a clear resin, but can be purchased in colours, and colour matched. It is a two part resin, one part resin, one part hardener. It is mixed in 2:1 proportions, of 2 Resin for each 1 Hardener. The Resin is part A, the hardener part B respectively.

Common applications for Urethane include coating on top of hardwood floors, concrete, metal, and epoxy finished floors.

Safety

Urethane is flammable. Use Urethane in a well ventilated area. Some form of dust mask or breathing protection is recommended.

Application Overview

1. Prepare Surface to be coated
2. Make sure temperature is at an appropriate level
3. Mix Urethane resin and Hardener
4. Apply with a 3/16-inch Nap roller. Use a brush for hard to reach areas
5. Wait 12 hours for the Urethane to cure
6. If necessary, Sand urethane, and apply at least a 2nd coat.

A more detailed overview of how to apply Advance Coatings urethane can be found in the Aliphatic Urethane Data Sheet.