Difference between revisions of "Safety Goggles"
| Line 4: | Line 4: | ||
===Where To Purchase=== | ===Where To Purchase=== | ||
| − | It's possible to get a name brand pair of Safety Goggles from local industrial suppliers. I don't recommend any particular vendor, and you are encouraged to do your own research. Typically, the companies that make Ski Goggles tend to make good goggles for working with chemicals. This is not surprising, since the end product is near identical. The pair I recently purchased was $20-30 picked up retail at a local industrial supplier (Grainger, but I don't necessarily recommend them. They were just the first that came up on a search). $20-30 is a lot more than a pair of safety glasses. but this is to protect eyesight, and the advantages will outweigh any of the cost. They simply make working with eye protection a better experience, and there is no going back to safety glasses, once you have had a good pair of goggles. The benefits are: They protect the eyes better, | + | It's possible to get a name brand pair of Safety Goggles from local industrial suppliers. I don't recommend any particular vendor, and you are encouraged to do your own research. Typically, the companies that make Ski Goggles tend to make good goggles for working with chemicals. This is not surprising, since the end product is near identical. The pair I recently purchased was $20-30 picked up retail at a local industrial supplier (Grainger, but I don't necessarily recommend them. They were just the first that came up on a search). $20-30 is a lot more than a pair of safety glasses. but this is to protect eyesight, and the advantages will outweigh any of the cost. They simply make working with eye protection a better experience, and there is no going back to safety glasses, once you have had a good pair of goggles. The benefits are: They protect the eyes better, are more comfortable, fog less, and visibility is better. They also fit the respirator much better than a pair of safety glasses does. |
===Do Not Buy These Low Cost Goggles=== | ===Do Not Buy These Low Cost Goggles=== | ||
Revision as of 17:27, 30 January 2024
Safety glasses (at a bare minimum) or better, Safety Goggles are highly recommended for all work with any chemicals. Of particular danger is the catalysts (MEKP or Part B of Epoxy). The catalyst tend to be more hazardous and reactive than the resins.
Safety Goggles
Eyes should be protected from splashing of resin, or any catalyst. You can purchase ANSI Z87 rated safety glasses, but we would highly recommend you instead purchase a pair of safety goggles such as pictured. A good name brand pair of Safety Goggles include a rubber gasket to better seal around the eyes, as well as offering better visibility due to a larger lens, and a tendency to fog up less.
Where To Purchase
It's possible to get a name brand pair of Safety Goggles from local industrial suppliers. I don't recommend any particular vendor, and you are encouraged to do your own research. Typically, the companies that make Ski Goggles tend to make good goggles for working with chemicals. This is not surprising, since the end product is near identical. The pair I recently purchased was $20-30 picked up retail at a local industrial supplier (Grainger, but I don't necessarily recommend them. They were just the first that came up on a search). $20-30 is a lot more than a pair of safety glasses. but this is to protect eyesight, and the advantages will outweigh any of the cost. They simply make working with eye protection a better experience, and there is no going back to safety glasses, once you have had a good pair of goggles. The benefits are: They protect the eyes better, are more comfortable, fog less, and visibility is better. They also fit the respirator much better than a pair of safety glasses does.
Do Not Buy These Low Cost Goggles
I do not recommend the low cost ($7) goggles such as pictured. These goggles are intended for mass production, and universal fit. They are useless because the fit is always a poor one around the edges. There is no proper rubber gasket around the side (just the plastic of the goggle). And they are also uncomfortable to wear for any long period. This type of goggle should be completely avoided.
Tips/Techniques
Do Not Scratch the Goggles
The first thing you should realize with the goggles, is that you absolutely under no circumstances want to scratch them. There is a tendency to be lazy with tools and leave them haphazardly around the workshop. Most people tend to work like this. But with a nice pair of goggles, you want to be 100% careful about where you put them. Always leave them with the lens facing up or on its side (never down). It may be possible to polish scratches out of the lens, but it is something that I haven't tried, and results would likely vary.
