Difference between revisions of "Template:MixingTable"

From Advance Coatings Wiki
Jump to navigationJump to search
(Created page with "{| class="wikitable" !colspan="6"|Catalyst & Resin Mixing Table |- |FOR THIS CONCENTRATION OF CATALYST L-50 OR M-50 |1 QUART RESIN |1 GAL. RESIN |5 GALS. RESIN |55 GAL. DRUM 4...")
 
 
Line 1: Line 1:
 +
Small amounts of catalyst are required for Polyester Resin hardening. See below for approximate values.
 +
 
{| class="wikitable"
 
{| class="wikitable"
 
!colspan="6"|Catalyst & Resin Mixing Table
 
!colspan="6"|Catalyst & Resin Mixing Table

Latest revision as of 04:25, 10 October 2019

Small amounts of catalyst are required for Polyester Resin hardening. See below for approximate values.

Catalyst & Resin Mixing Table
FOR THIS CONCENTRATION OF CATALYST L-50 OR M-50 1 QUART RESIN 1 GAL. RESIN 5 GALS. RESIN 55 GAL. DRUM 475 LBS.
0.5% RESIN 4.7 CC 0.2 OZ. 18.8 CC 0.72 OZ. 94.0 CC 3.6 CC 2.5 LBS. 40 OZ.
1% GELCOAT 9.4 CC 0.4 OZ. 37.6 CC 1.44 OZ. 188 CC 7.2 OZ. 4.95 LBS. 79 OZ.
1.5% 14.1 CC 0.54 OZ. 56.4 CC 2.2 OZ. 282.0 CC 10.8 OZ. 7.4 LBS 119 OZ.
2% 18.8 CC 0.72 OZ. 75.2 CC 2.9 OZ. 376.0 CC 14.4 OZ. 9.9 LBS. 158 OZ.

Note: These chemical reactions are temperature sensitive. Best results happen between 60°F - 80°F. We recommend you start at 1% for resins. Do NOT go lower than ½% for resin. We recommend you start at 1-1.5% for Gelcoats. Do NOT go lower than 1% for gelcoats.

For faster promotions than 2% call Advance Coatings Company