Difference between revisions of "Application Notes"
From Advance Coatings Wiki
Jump to navigationJump to search| (One intermediate revision by the same user not shown) | |||
| Line 9: | Line 9: | ||
* [[Gelcoat Anchoring]] - Using leftover polyester resin gelcoat to anchor (non-load bearing) bolts in the wall. | * [[Gelcoat Anchoring]] - Using leftover polyester resin gelcoat to anchor (non-load bearing) bolts in the wall. | ||
| − | * [[Cleanliness]] - A little cleanliness will | + | * [[Cleanliness]] - A little cleanliness will go a long way. |
==External Links== | ==External Links== | ||
* Mixing resin with conductive materials for better thermal transfer: https://pubs.rsc.org/en/content/articlelanding/2025/ra/d4ra07419j In this example, they are substituting aluminum oxide for silica. Something you could well do with a finished resin (as silica is often used as a last stage filler). | * Mixing resin with conductive materials for better thermal transfer: https://pubs.rsc.org/en/content/articlelanding/2025/ra/d4ra07419j In this example, they are substituting aluminum oxide for silica. Something you could well do with a finished resin (as silica is often used as a last stage filler). | ||
| + | |||
| + | |||
| + | [[Category:Application Notes]] | ||
Latest revision as of 10:31, 27 February 2026
This page is WIP, please bear with us.
- Hand Lay Up Guide - From the Catalog. Instructions on Polyester Resin usage.
- Aliphatic Urethane for Hardwood Floor Refinishing - 2019-2020 Business Renovations.
- Anchoring Cement Application - Adhering Threaded Rod to Concrete
- Epoxy for Bathroom Bolt Replacement - A couple attempts at replacing floor bolts in a rear exit toilet.
- Gelcoat Anchoring - Using leftover polyester resin gelcoat to anchor (non-load bearing) bolts in the wall.
- Cleanliness - A little cleanliness will go a long way.
External Links
- Mixing resin with conductive materials for better thermal transfer: https://pubs.rsc.org/en/content/articlelanding/2025/ra/d4ra07419j In this example, they are substituting aluminum oxide for silica. Something you could well do with a finished resin (as silica is often used as a last stage filler).
