Anchoring Cement Application

We have a product which is a type of Anchoring Cement. It is useful for bonding e.g. metal to concrete.

Small Tank Installation

It's simple to use. It's mixed in a two part, like an epoxy. Part A is the resin, and Part B is the catalyst. Here's an example where this Anchoring Cement was used.

• 

  Tank Placement.

• 

  Close up view.

While admittedly, the pictures don't show the install, the setup for this is as follows:

• Drill hole in concrete slightly larger than the threaded rod
• Mix the resin and catalyst
• Insert activated resin into the hole
• Insert threaded rod into hole
• Create scaffolding if necessary, so that the rod stays in position while it cures (vertical in this case).
• Clean up any excess with Acetone
• Once the resin has cured, test the bond, then attach any structure.

A similar procedure was used for two part epoxy and bathroom floor toilet bolts (unsuccessfully here, but that was due to user error).