Difference between revisions of "Nap Roller"

From Advance Coatings Wiki
Jump to navigationJump to search
(Created page with "We currently recommend a 3/16-inch Nap Roller to be used with our Epoxy and Urethane products. This is a non-standard size and should be ordered beforehand - many retail store...")
 
Line 8: Line 8:
 
The technique of using a Nap Roller, is to put a moderate amount of urethane on the floor.
 
The technique of using a Nap Roller, is to put a moderate amount of urethane on the floor.
 
Then, pull the roller ahead of the urethane, back towards yourself. It is generally better
 
Then, pull the roller ahead of the urethane, back towards yourself. It is generally better
to pull the roller, than to push it. You do not need to push down on the roller, as you might
+
to pull the roller, than to push it (Pushing a roller, can cause urethane/epoxy to spit forward). You do not need to push down on the roller, as you might
 
when painting. This is not necessary with Urethane. You want the roller to pull any pools
 
when painting. This is not necessary with Urethane. You want the roller to pull any pools
 
of urethane towards yourself, until the pool is exhausted. You can go with or against the grain
 
of urethane towards yourself, until the pool is exhausted. You can go with or against the grain

Revision as of 11:08, 31 August 2019

We currently recommend a 3/16-inch Nap Roller to be used with our Epoxy and Urethane products. This is a non-standard size and should be ordered beforehand - many retail stores do not carry this size in stock. The 3/16-inch roller will fit on a standard paint roller. It is also recommended to use a pole, that attaches to the paint roller. Advance Coatings can supply Nap Rollers, Poles, and Paint Rollers for use of its products.

How to Use a Nap Roller with Urethane (ex. Hardwood Flooring)

The technique of using a Nap Roller, is to put a moderate amount of urethane on the floor. Then, pull the roller ahead of the urethane, back towards yourself. It is generally better to pull the roller, than to push it (Pushing a roller, can cause urethane/epoxy to spit forward). You do not need to push down on the roller, as you might when painting. This is not necessary with Urethane. You want the roller to pull any pools of urethane towards yourself, until the pool is exhausted. You can go with or against the grain in a hardwood floor. There is no requirement to go with the grain.

Tips

Buy a Quality Nap Roller

Buy a Nap Roller that is made for solvents, and is of a good quality. Poor Nap Rollers will dissolve or otherwise lose fibers in the finish when applying.

Nap Rollers come in Various Lengths

There are different length rollers which will fit an appropriately sized paint roller. For large rooms, you may use a longer roller, for edges and corners, you may use a smaller nap roller. You can also use a brush to do edges of walls.